Products
Current Location: >>Home >> Products >> Cellular Repeater Series >> Dual Band Cellular Repeater >> GSM850&1900

GSM850&UMTS1900 Dual Band Cellular Repeater

Model
  • GSM850&UMTS1900: UNDR1

Description

Picture of GSM850&UMTS1900 Dual Band Cellular RepeatersGSM850&UMTS1900 Dual Band RF Cellular Repeater (RFR) is the kind of RF Repeater that can simultaneously work in two wireless cellular systems. It transparently coveys and amplifies the wireless signal of two systems respectively between the BTS (Base Transceiver Station) and mobiles.

The GSM850&UMTS1900 Dual Band RFR is working as a relay between the BTS and mobiles. It picks up the signal from the BTS via the Dual Band Donor Antenna, linearly amplifies the cellular signal and then retransmits it via the Dual Band Services Antenna (or the Dual Band Indoor D.A.S) to the weak/blind coverage area. And the mobile signal is also amplified and retransmitted to the BTS via the opposite direction. As per operator's requirement for working frequency, two types of Dual Band RFR are available

  • Band-Selective Dual Band RF Repeater: to amplify all signals in the whole band (Various bandwidth is available upon request)
  • Channel-Selective Dual Band RF Repeater: to amplify only the signals transmitted in the customized 1, 2, 4, 6, 8 channels (A narrow band with customized central frequency).

Application
To expand signal coverage of fill signal blind area where signal is weak or unavailable.
  • Outdoor/Rural: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc.
  • Indoor: Hotels, Exhibition Centers, Basements, Shopping Malls, Offices, Packing Lots etc
The GSM850&UMTS1900 Dual Band RFR is mainly applicable to such cases:
  • The repeater can find an installation place which can receive pure BTS signal at strong enough level as the Rx Level in repeater site should be more than -70dBm;
  • And can meet the requirement of antenna isolation to avoid self-oscillation.

GSM850&UMTS1900 Dual Band Cellular Repeater for Indoor Coverage


GSM850&UMTS1900 Dual Band Cellular Repeater for Indoor Coverage


GSM850&UMTS1900 Dual Band Repeater for Outdoor Coverage


GSM850&UMTS1900 Dual Band Cellular Repeater for Outdoor Coverage


Specification
Specifications
Working Frequency (customizable) Uplink 824~849MHz&1850~1910MHz
Downlink 869~894MHz&1930~1990MHz
Working Bandwidth 2~25 MHz (customizable)
Output Power (customizable) 27~43 dBm (0.5~20 W)
Gain ≥ 85dB
Gain Adjustment Range 1~31dB @ step of 1dB
Voltage Standing Wave Ratio (VSWR) < 1.5
Noise Figure ≤ 5dB
In-Band Ripple ≤ 3dB p-p
Max. Input Level ≥ -10dBm
Spurious Emission Within working band ≤ -15dBm/30kHz
Out of working band
(Δf > 2.5MHz)
9kHz~1GHz: ≤ -36dBm/30kHz
1GHz~12.75GHz: ≤ -30dBm/30kHz
In-Band Intermodulation Attenuation ≤ -40dBc/30kHz (measured under rated output power)
System Delay ≤ 1.5μSec
I/O Impedance 50Ω
RF Connector N-Type (Female)
Temperature Range Operation: -25°C ~ +55°C / Storage: -30°C ~ +60°C
Relative Humidity Range ≤ 95% (non condensing)
Power Supply (customizable) DC +24V / AC 220V±15%, 50Hz / AC 110V±15%, 50Hz
Backup Power Supply (optional) 4 hours
Casing Level Output power @27~30dBm: IP31
Output power @33~43dBm: IP65
Dimensions Output power @27~30dBm: 385mm X 300mm X 130mm
Output power @33~37dBm: 570mm X 325mm X 215mm
Output power @37~43dBm: 630mm X 400mm X 230mm
Weight Output power @27~30dBm: 8kg
Output power @33~37dBm: 27kg
Output power @37~43dBm: 35kg
Remote Monitoring/Control via NMS Supported
AGC (Automatic Gain Control) /
ALC (Automatic Level Control)
Supported