Mobile Signal Booster
1/2" Jumper Cable is made of cable with connectors which is usually applied for connecting to an antenna of transmission equipment. This cable incorporates high foaming polyethylene insulation technology to minimize signal loss and have excellent electric features such as low damping and reflection coefficient.
Specification
Specifications - Construction
| Inner Conductor | Copper-clad aluminum wire |
| Dielectric | Special foamed plastic with low permittivity and low loss |
| Outer Conductor | Corrugated copper tube |
| Jacketing | Black polyethylene |
| Cable Type | 1/2" superflexible |
| Connector Type | N-Male, N-Female, 7/16-Male, 7/16-Female, N-Male right angle, 7/16-Male right angle, 4.3-10 Male, 4.3-10 Female |
| Length | Standard delivery length: 0.5m, 1m, 1.5m, 2m or 3m. Other lengths also available on request. |
Specifications - Electrical Characteristics at +20°C
| Characteristic Impedance | 50 ± 1 Ω |
| Maximum Operating Frequency | 3000 MHz |
| Peak RF Voltage Rating | 1.39 kV |
| Peak Power Rating | 19.0 kW |
| Return Loss (VSWR) | With 7/16 male and female, N male and female connectors: 0~1000MHz: 28dB, 1000~2700MHz: 26dB With 7/16 male 90°, N male 90° connectors: 0~1000MHz: 26dB, 1000~2700MHz: 24dB |
| Attenuation (at cable) | 1000MHz: 0.11dB/m, 2000MHz: 0.17dB/m |
| Connector Attenuation (2 pcs) | ≤ 0.1dB |
| Average Power Rating | 1000MHz: 710W, 2000MHz: 480W |
| Intermodulation, typical (2x20W Tx) | 800~1000MHz: -160dBc, 1600~2000MHz: -160dBc |
Specifications - Mechanical Characteristics
| Maximum Pulling Force | 500 N |
| Minimum Bending Radius | Single Bending: 15mm, Repeated Bending: 30 mm |
| Waterproof Level | IP68 |